Any house installed with a plumbing system is sure to experience plumbing problems anytime. Whether old or new, problems will surely crop up due to certain reasons. Now, before you pick up your phone and dial your plumbing company, you must first try to see what the problem is. Besides, if it is a minor problem, it would be a waste of time and money to call a professional when you can fix the problem yourself.
Here are some common plumbing problems that you experience at one point or another.
Leaks in faucets
Leaky faucets are actually quite easy to remedy. In most cases, they only need rubber gasket replacements. You can do that to get rid of leaks fast. In some instances, leaks are because of loosened parts which need to be tightened. The fix is to make sure that those parts are completely sealed.
No hot water from the heater
People just find it irritating to run out of hot water in the middle of a relaxing bath. In that situation, the problem is with the hot water heater. If the problem is not so severe, you might only need to turn up the thermostat on your heater. Obviously, you can get hot water to flow once again.
On the other hand, if adjusting the thermostat does not fix the problem, there might be particles clogging the outlet. Usually, these particles are calcium deposits from water itself. This will most certainly need the expertise of a qualified plumber. If that still doesn’t fix the problem, then the water heater itself may need repairs or a replacement.
This problem is not that difficult to solve, however, for those who just dislike messing around the clogged toilet, the problem is huge! But then again, all you need to fix a clogged toilet is a plunger. There is nothing that a trusty plunger won’t be able to flush away into the septic tank.
Inefficient flushing of the toilet
This is another unpleasant plumbing problem that homeowners deal with. There is no clog in the toilet but the toilet just does a bad job of flushing waste. For a problem like this, you have to inspect the water tank to see if the float is working right. In most cases, a low-floating float is the culprit. Thus, you can adjust the float so that it can rest higher. This allows more water to fill the tank, which will lead to the efficient flushing away of waste.
There are other common plumbing problems that homeowners have to put up with. However, with a bit of quick thinking and general knowledge about what to do, you can actually do something to get the problem solved. But, whenever you feel that the problem is too big for you, go ahead and call in the experts. You owe that to yourself.
We can Help!
Contact Us today for an estimate